MG-90 PET blow moulding machine for large PET bottles is specially designed to produce 5-gallon PET container and 25L wide mouth jar. Its max output is up to 90 BPH for 5-gallon bottle and even could reach 120 bottles per hour for the one way used thin wall 5 gallon bottles.
MG-90 PET blow moulding machine consists of main unit and rotary infrared heater. The ordinary quartz lamp cannot heat preform ideally because the preform wall is excessively thick. The infrared heater with high penetrative force can heat the inside and outside of preform simultaneously and keep preform in even heating, therefore high shaping quality.

Features:

1.       Special design for PET Gallon Bottle up to 6 Gallon
2. Produce wide mouth jar up to 25 liter with neck size up to 200mm.
3. Using Infrared reheat units to achieve uniform heating throughout the wall of preform
4. Adopt special designed preform heating system to ensure the optimal heating effect for 730g thick-wall preform
5. Special designed fan-cooling system in the heating channels to keep the oven with constant temperature and ensure the preform can be heated completely.
6. Water cooling system ensures the quality of preform neck.
7. Up to 90 bottles/hour using one-cavity mold for 5-gallon bottle
8. Use advanced PLC control system with counting function and time-control precision to 0.01second, and a use-friendly panel.
9. Equipped with special designed air storage units
10.Simple installation & startup adjustment

TYPE	ITEM	UNIT	MG-90technical data
Container	Product material	/	PET
	Container volume	L	5-6 (2-cavity)  10-25 (1-cavity)
	Theoretic output	Psc/hr	5gallon: 90 5L: 400
	Preform length	M	15-460
	Preform inner diameter	Mm	15-200
Molding	Max mold plate dimendion (L×W)	Mm	420×500
	Max mold thickness	Mm	400
	Clamping force	KN	100
	Mold opening stroke	Mm	330
Air compressor	High pressure compressor	m³/Mpa KW	>=0.60/3.0
	Air pressure for blowing	Mpa	2.0~3.0
	Low pressure compressor	m³/Mpa KW	>=0.8/1.25 7.5
Main machine electricity	Power	M	15
	Voltage / frequency	V/Hz	380-240-110/50-60(3 phase)
Machine size and weight	Main machine	M	1.55×0.82×2.00
	Main machine weight	T	1
	Heater (L×W×H)	T	2.42×0.65×1.60
	Heater weight	T	0.38